ShownTemporary fence panels with precast blocks, ready for delivery
Fencing Systems · Temporary & Site Fencing
Movable PPGI corrugated panel fences on concrete blocks, plus mesh panel fencing, for construction sites, phased works and events.
Product overview
Temporary fencing is a movable site boundary made of ready-built panels that stand on concrete blocks or weighted feet, so it can be installed, moved and reused without digging. In the UAE the most common type is the PPGI corrugated panel fence: 2 m × 2 m pre-painted steel sheet panels in a GI frame, fixed on precast concrete blocks.
Temporary fencing gives a construction site a secure boundary from day one, without foundations. Each panel is built in the factory, carried to site and stood on precast concrete blocks, then joined to the next panel with a coupler. When the work area changes, the panels are lifted, moved and fixed again.
In the UAE most contractors use the solid PPGI corrugated panel type. A 2 m × 2 m pre-painted corrugated steel sheet is framed with GI U-channels at the top and bottom and GI pipes at the sides, and a diagonal back stay holds it upright. The solid face screens the site, holds back dust and gives a clean, uniform look from the road.
Where a see-through boundary is enough, for example inside a site, around stores or for events, galvanized welded-mesh panels on rubber or concrete feet are lighter and faster to move. OGB supplies both systems with all bases, couplers, stays and fixings.
Characteristics
Panels stand on precast concrete blocks, so the boundary goes up in hours and leaves no foundations behind.
Panels lift off, move to the next work zone and go back up. The same set can serve several projects.
Solid PPGI panels for screening and dust; welded-mesh panels where you only need a see-through boundary.
System anatomy
PPGI corrugated sheet
The solid 2 × 2 m face that screens the site and stops dust and debris.
GI U-channels (top & bottom)
Hold the sheet edges straight and stiffen the panel.
GI side pipes
Vertical frame members that drop into the holes of the front block.
Diagonal back stay
Braces the panel against wind; bolted to the rear block.
Precast concrete blocks
Two per panel; carry the panel and the back stay with no excavation.
Fence coupler
Clamps neighbouring panels together so they cannot be pushed apart.
In the field
Selection guide
| PPGI temporary fence | Continuous site hoarding | Mesh temporary panels | |
|---|---|---|---|
| Face | Solid 2 × 2 m panels | Solid, overlapping sheets with no gaps | Open welded mesh |
| Support | Two concrete blocks per panel + back stay | Heavy GI pipe back stays about every 2.5 m | Rubber or concrete feet |
| Moving it | Easy: panel by panel | Slower: planned, longer-term layout | Fastest |
| Screening and dust | Good | Best | None |
| Best for | Sites whose layout changes, plots, yards | Busy roads and public-facing sites, branding | Internal zones, stores, events |
Solid panels catch more wind than mesh. Block weight, stay spacing and height are set for each site.
Technical data
Share your required size, quantity and finish in the enquiry form and OGB confirms availability in writing.
Enquire about Temporary Fencing| PPGI panel size | 2.0 m × 2.0 m standard sheet panel |
|---|---|
| Sheet | Corrugated pre-painted steel (PPGI), 0.40 – 0.90 mm |
| Colours | RAL 9002 off-white standard; RAL 1001 beige, RAL 5010 / 5012 blue, RAL 7035 grey or any RAL on request |
| Frame | GI U-channel 40 × 40 mm top and bottom (50 × 50 mm for deeper profiles); GI pipe 42.3 mm OD sides |
| Back stay | Diagonal GI pipe from the panel to the rear block |
| Base | Two precast concrete blocks per panel, 500 × 400 × 200 mm: front block with pipe holes, rear block with threaded bolt |
| Joint | Fence coupler joining the two front pipes of neighbouring panels |
| Mesh panel option | 3.5 m × 2.0 m galvanized welded-mesh panel on rubber or concrete feet with clamps |
Questions
The common PPGI panel is 2 m wide × 2 m high, made from a corrugated pre-painted steel sheet in a GI frame. Mesh temporary panels are usually 3.5 m wide × 2 m high.
Each panel stands on two precast concrete blocks (about 500 × 400 × 200 mm). The front block takes the side pipes; the rear block holds a diagonal back stay. Couplers join neighbouring panels.
Temporary fencing is modular and easy to move as the site changes. Continuous site hoarding uses overlapping sheets with no gaps and heavier stays for a long-term, fully screened perimeter along roads and public areas.
Off-white RAL 9002 is the usual site colour in the UAE. Beige RAL 1001, blue, grey or any RAL colour can be supplied on request.
Free tools · No sign-up
Free calculator for sandwich panels, fencing, roofing sheets and steel weight. Change a number and the drawing and quantities update live. No prices, no sign-up.
Related products
Fencing · Temporary & Site Fencing
Continuous and panel-type steel hoarding in RAL 9002 and other colours for public-facing UAE construction sites.
Fencing · Site Hoarding
Off-white PPGI corrugated hoarding on galvanized pipe frames, as a continuous run or as movable 2 × 2 m block-mounted panels.
Fencing · Chain Link Fencing
Galvanized and PVC-coated chain-link fencing, 1.0 – 4.0 m high, with posts, rails and fittings for permanent perimeters.
Fencing · Permanent Fencing
Off-white uPVC panels on a galvanized 48.3 mm pipe frame with precast concrete blocks: clean, rust-free site hoarding and boundary screening.
Request a quotation
Share your drawings, bill of quantities or a simple list of items. OGB confirms sizes, finishes and availability and returns an itemised quotation.
